The Extractor Kit 2500 is a flexible system for capture of noxious fumes and gases that occur when soldering, gluing, or working with solvents. The Extractor Kit 2500 comes supplied with two FX50 2 inch diameter arms, which have a length of 44 inches. The two extraction arms are constructed of anodized aluminum with polypropylene joints. The arms come supplied with a tight damper for adjusting airflow to fit various applications. The arms can be used independently from each other due to the variable speed of the fan and dampers in the arms. The standard filter is supplied with approximately 4 lbs of activated carbon. An optional all-carbon filter is available for fumes generated by chemicals or solvents. The extraction arms come supplied with an integrated flange nozzle. The filter is disposable and filter change is dust free. All components of the kit come supplied in one box and all that is needed for assembly is a screwdriver. The Extractor Kit 2500 is also available in an ESD Model for the high demands on the electronic industry for static control.